Stainless Steel 304/304L/316/316L No.4 Finish Strips Manufacturer | Stainless Steel 304/304L/316/316L No.4 Finish Strips Suppliers | Authorised Distributor & Stockist of Jindal Strips

Stainless Steel No.4 Finish Strips Suppliers | Stainless Steel 304/304L EN 1.4301/ EN 1.4307 Strips | Stainless Steel 316/316L UNS S31600/UNS S31603 Strips

DM Metalloys Pvt. Ltd. distinguished manufacturer, supplier and exporter of stainless steel 304/304L/316/316L in NO. 4 finish. No 4 finish is duller than the other mutual finishes, 2B and BA and is commonly used where lower reflectivity or gloss is mandatory and where welds and other fabrication marks are to be refinished to match the innovative surface. This is not possible with 2B and difficult with BA. Abrasive belts have very fine grains of refractory material such as silica, alumina and zirconia entrenched in an adhesive layer on a flexible cloth or paper backing. The belts in NO.4 finish are wider than the stainless steel, which is usually worked on as coil, or sometimes in individual sheets. The steel is run slowly under rolls, on which the abrasive belts run.

Stainless Steel 304/304L/316/316L No.4 Finish Strips Supplier

Applications of Stainless Steel 304/304L/316/316L No.4 Finish Strips

  • Kitchen
  • Restaurant Equipment
  • Food Processing
  • Dairy Dquipment

Specification of Stainless Steel 304/304L/316/316L No.4 Finish Strips

STAINLESS STEEL TRADENAME UNS NO. WERKSTOFF NO DENSITY (G/CM3)
304 304 Stainless S30400 1.4301 8
304L 304L Stainless S30403 1.4307 8
304H 304H Stainless S30409 1.4948 8
316 316 Stainless S31600 1.4401 8
316L 316L Stainless S31603 1.4404 8
316Ti 316Ti Stainless S31635 1.4571 8

Chemical Composition of Stainless Steel 304/304L/316/316L No.4 Finish Strips

C MN SI P S CR NI FE
304 0.08 max. 2.00 max. 1.00 max 0.045 max. 0.03 max. 18.0 – 20.0 8.0 – 10.5 Balance
304L 0.03 max. 2.00 max. 1.00 max. 0.045 max. 0.03 max. 18.0 – 20.0 8.0 – 12.0 Balance
304H 0.04-0.10 2.00 max. 1.00 max. 0.045 max. 0.03 max. 18.0 – 20.0 8.0 – 12.0 Balance

Chemical Composition of Stainless Steel 304/304L/316/316L No.4 Finish Strips

C MN SI P S CR NI MO TI
316 0.08 max. 2.00 max. 1.00 max. 0.045 max. 0.03 max. 16.0 – 18.0 10.0 – 14.0 2.00 – 3.00
316L 0.03 max. 2.00 max. 1.00 max. 0.045 max. 0.03 max. 16.0 – 18.0 10.0 – 14.0 2.00 to 3.00 0.5 max.
316TI 0.08 max. 2.00 max. 1.00 max. 0.045 max. 0.03 max. 16.0 – 18.0 10.0 – 14.0 2.00 to 3.00 5 x %C

Physical & Mechanical Properties of Stainless Steel 304/304L/316/316L No.4 Finish Strips

  304 304L 304H 316 316L 316TI
Density 8 8 8 8 8 8
Melting Range,℃ 1400 ℃ 1400 ℃ 1400 ℃ 1400 ℃ 1400 ℃ 1400 ℃
Elongation % 40 40 40 40 – 55 40 – 60 40 – 50
Tensile Strength (Mpa) 515 485 515 515 485 515
Yield Strength (Mpa) 205 170 205 205 170 205
Hardness (Brinell) 201 201 201 201 201 201

DM Metalloys Pvt. Ltd. Supplies Stainless Steel 304/304L/316/316L No.4 Finish Strips in Faridabad, Gurgaon, Gurugram, Gaziabad, Noida, Lukhnow, Delhi, Delhi NCR, Ludhiana, Amritsar, Chandigarh, Jalandhar, Baddi, Punjab, Uttar Pradesh, Haryana, Mumbai, Pune, Sahibabad, Meerut, Manesar, Bhiwadi, Bawal, Neemrana, SIDCUL, Sonepat, Ambala, Mohali, Panchkula, Kapurthala, Bareli, Kanpur.

OUR SUMMARY:
Reviewer
DM Metalloys Pvt. Ltd.
Review Date
Reviewed Product
Stainless Steel 304/304L/316/316L No.4 Finish Strips Suppliers in India
Author Rating
5 star-rate star-rate star-rate star-rate star-rate