Stainless Steel 304/304L/316/316L No.8 Finish Plates Manufacturer | Stainless Steel 304/304L/316/316L No.8 Finish Plates Suppliers | Authorised Distributor & Stockist of Jindal Plates

Stainless Steel ASTM A240 No.8 Finish Plates Exporters | Stainless Steel 304/304L EN 1.4301/ EN 1.4307 Plates | Stainless Steel 316/316L UNS S31600/UNS S31603 Plates

DM Metalloys Pvt. Ltd. is reputed manufacturer, supplier and exporter of stainless steel NO. 8 finish of grades 304/304l/316/316l plates. No. 8 Finish is the most reflective finish covered by ASTM standards. It is fashioned using the same process as No. 7 finish except that polishing continues for an supplementary five to ten minutes. The gravel lines are much less noticeable than the No. 7 finish, but can still be understood if examined carefully. The resulting finish is the neighboring finish to an actual mirror, but is not perfectly reflective.

Stainless Steel 304/304L/316/316L No.8 Finish Plates Supplier

Applications of Stainless Steel 304/304L/316/316L No.8 Finish Plates

  • Clean rooms
  • Column covers
  • Mirrors
  • Ornamental trim
  • Press plates
  • Reflectors
  • Signage
  • Wall panels

Specification of Stainless Steel 304/304L/316/316L No.8 Finish Plates

STAINLESS STEEL TRADENAME UNS NO. WERKSTOFF NO DENSITY (G/CM3)
304 304 Stainless S30400 1.4301 8
304L 304L Stainless S30403 1.4307 8
304H 304H Stainless S30409 1.4948 8
316 316 Stainless S31600 1.4401 8
316L 316L Stainless S31603 1.4404 8
316Ti 316Ti Stainless S31635 1.4571 8

Chemical Composition of Stainless Steel 304/304L/316/316L No.8 Finish Plates

C MN SI P S CR NI FE
304 0.08 max. 2.00 max. 1.00 max 0.045 max. 0.03 max. 18.0 – 20.0 8.0 – 10.5 Balance
304L 0.03 max. 2.00 max. 1.00 max. 0.045 max. 0.03 max. 18.0 – 20.0 8.0 – 12.0 Balance
304H 0.04-0.10 2.00 max. 1.00 max. 0.045 max. 0.03 max. 18.0 – 20.0 8.0 – 12.0 Balance

Chemical Composition of Stainless Steel 304/304L/316/316L No.8 Finish Plates

C MN SI P S CR NI MO TI
316 0.08 max. 2.00 max. 1.00 max. 0.045 max. 0.03 max. 16.0 – 18.0 10.0 – 14.0 2.00 – 3.00
316L 0.03 max. 2.00 max. 1.00 max. 0.045 max. 0.03 max. 16.0 – 18.0 10.0 – 14.0 2.00 to 3.00 0.5 max.
316TI 0.08 max. 2.00 max. 1.00 max. 0.045 max. 0.03 max. 16.0 – 18.0 10.0 – 14.0 2.00 to 3.00 5 x %C

Physical & Mechanical Properties of Stainless Steel 304/304L/316/316L No.8 Finish Plates

  304 304L 304H 316 316L 316TI
Density 8 8 8 8 8 8
Melting Range,℃ 1400 ℃ 1400 ℃ 1400 ℃ 1400 ℃ 1400 ℃ 1400 ℃
Elongation % 40 40 40 40 – 55 40 – 60 40 – 50
Tensile Strength (Mpa) 515 485 515 515 485 515
Yield Strength (Mpa) 205 170 205 205 170 205
Hardness (Brinell) 201 201 201 201 201 201

DM Metalloys Pvt. Ltd. Supplies Stainless Steel No.8 Finish 304, 304L, 316, 316L Plates in Faridabad, Gurgaon, Gurugram, Gaziabad, Noida, Lukhnow, Delhi, Delhi NCR, Ludhiana, Amritsar, Chandigarh, Jalandhar, Baddi, Punjab, Uttar Pradesh, Haryana, Mumbai, Pune, Sahibabad, Meerut, Manesar, Bhiwadi, Bawal, Neemrana, SIDCUL, Sonepat, Ambala, Mohali, Panchkula, Kapurthala, Bareli, Kanpur.

OUR SUMMARY:
Reviewer
DM Metalloys Pvt. Ltd.
Review Date
Reviewed Product
Stainless Steel 304/304L/316/316L No.8 Finish Plates Suppliers in India
Author Rating
5 star-rate star-rate star-rate star-rate star-rate